192.168.1.1 Login Page, Username, Password and Router Setup

We all are using Wireless Routers to use WiFi on our Smartphones and laptops. Nowadays due to security reasons, we all should know how to use a Router and how to login to Router using a 192.168.1.1 IP address. So we are here for your help. You want to change your WiFi password or do the same thing but you do not have access to 192.168.1.1, maybe because you forgot your username and password, but it could be a faulty device. So how to access the account 192.168.1.1. The article below will give you the most efficient way to fix bugs that can not be entered into 192.168.1.1.

If you use the default username and password to the device, then it’s quite easy to log into the router by anybody. That’s the reason to modify the log in detail. There are various sorts of settings available in the router.

What is the IP address 192.168.1.1?

192.168.1.1 is the IP address to access the Wifi modem – which can change the parameters and network settings so that the internet can work better. This is the default IP address of all wireless routers and modems on the market today.

However, there are many router manufacturers out there and they all have a different IP addresses for login including 192.168.1.1, 192.168.0.1, and 10.0.0.1.

How to use192.168.1.1 IP Address for Login?

To access your router, you need to connect your computer or phone, tablet with the modem via Wifi or LAN port.

Step 1: Open a Web browser and enter https://192.168.1.1 or https://192.168.0.1 and https://10.0.0.1.

Step 2: Now you have to Enter the default username and password for your Router which is:

• Username: admin
• Password: password or admin

In case you do not remember Router username and password details, then check your Router. You can find it there. If you have changed Router Password then you have to reset it.

Why am I unable to connect 192.168.1.1?

• First of all check what is the IP address of your Router?
• Also, Check the Ethernet cable used to connect your Router with your Computer.
• Also, check Router is on

Also Read

How to Find IP Address of Router on Windows

Now we will show you how to find the IP address of your router on Windows computer. The common and default IP Address is 192.168.1.1, but sometimes we change it during the installation and if we forget then how we can find because this IP addresses very much required if you want to change some settings in your Router. Okay, so just follow these steps:

Step 1: Go to the start menu and type CMD in the search bar.

Step 2: Now type “ipconfig”.

Step 3: Find Default Gateway and note down the IP. This is the default Router IP Address.

So it is very easy.

How to Change Router Password

If you want to keep your Router safe and secure then you have to change Router Password. All you need to do is, access admin page > advanced settings > Router Admin > Password > and change password save.

How to Change WiFi Password in Router

Step 1: Log in to your Router with Default username and password.

Step 2: Once done, go to Router admin page and then go to Wireless and then go to Wireless Security.

Step 3: Select WPA/WPA2 Security Settings. Now choose Authentication type WPA2-PSK.

Step 4: Enter Password in the wireless password field and click on save.

What to do if you forgot your router username and password?

If you have changed the default username and password as we said above, you have to reset your Router to Default Settings.

Step 1: Press and keep holding the reset button for at least 10 seconds.

Step 2: Wait for the device to reboot. Once done, you can log in with the default username and password.

Step 3: Change the IP address 192.168.1.1 to avoid conflicts

Step 4: If two devices have the same IP address is plugged into the network, it will lead to IP Conflict.

Step 5: So you have to change your Router IP Address.

Step 6: Go to Router Login page > Network and then go to LAN Settings.

Step 7: Then Enter the new IP Address which is unique.

• 192.168.2.1

Step 8: You have to change only the 3rd number. Once done, save settings and its done.

Example: Tenda wifi device with an IP address default is 192.168.0.1. If you plug in the network address range 192.168.0.x/24, it will automatically detect the conflict. So you have to change the IP Address of the connected devices which has the same IP Address.

Thank You for reading this complete guide on 192.168.1.1 Login Page, Username, Password, and Router Setup. If you need any help then comment below.